WMS-mixers with possibilities of wireless connection (subscription is required)
Adjustable hygiene flushing, intervals and rinsing time (to avoid stagnant water)
Logging of all flushings with point of time, water consumption and temperature for individual mixer or group of mixers (minimum, maximum and average values)
Battery monitoring
Built-in temperature measurements of mixed water temperature
Programmable temperature stop, the mixer will turn off directly at set maximum temperature
With shower connection down
Thermostatic function 
Temperature handle with safety stop at 38°C 
Adjustable maximum temperature, pre-set to 42°C 
Soft closing solenoid valve 
Safe against vandalism, complete in metal 
The mixer is activated by holding a hand or a finger against the ring on the sensor. The mixer will run for 1 minute after being activated, the sensor will then recognize the individual and continue to run as long as there is someone in front of the mixer. 
After a total of a 3 minutes shower, it will turn off automatically. If the person leaves the area in front of the shower it will turn off after 20 seconds. While showering the mixer can be manually turned off by holding a hand or a finger against the ring on the sensor 
Flush Timeout - safety shut-off to prevent flooding, maximum of 5 minutes 
Can be turned off by solenoid valve (eg for cleaning) 
Low power consumption - Long life 
Equipped with system for thermal disinfection against legionella 
Battery operation, can be converted to mains operation 
IP class sensor, IP67 
Approved non-return valves, EN-Standard EN1717
Installation:
Note! Gateway and a subscription is required for WMS 
Automatic sensor calibration 
Easy to change battery, without turning off the water supply 
Mains operation requires installation of the AC adapter 1623-0000, and power supply FMM 1619-4000 alternatively transformator FMM 1619-3000

Settings:
Adjustable max temperature 
With Gateway and WMS:
- Hygiene flushing with adjustable time and intervals
- Initiate hot water rinsing
- Programming of rinsing times, temperature alarm och temperature stops
- Alert signal if exceeding the time limit for stagnant water (the latest flushing)